PDA2100A Full Function Engine Analyzer Personal Diagnostic Assistant Data Sheet

Specifications

pdf

The Omitec PDA2100A Ignition Analyzer is the only hand-held full function engine analyzer . It includes 6 tools in one powerful, easy -to-use, hand-held unit. The base PDA2100A provides the following functions: 4 channel Lab Scope 6-panel, 4-channel, digital Multi-Meter Sensor specific Autometers Secondary and Primary Ignition Scope for conventional (DI) and Electronic Ignition (EI) engines Complete Ignition Analyzer with raster and parade displays of primary/secondary or power/waste Full Function Engine Tester Milliamp probe for low current inductive testing The Omitec PDA2100A is a revolutionary diagnostic product that provides a wide range of automotive diagnostic functions at a low cost. Diagnostic functions such as ignition analysis, cylinder efficiency, oscilloscope and others are for the first time available in a convenient, integrated hand held and low cost package. Its modularity allows for expansions and enhancements in the field, in a cost effective manner. Scanner, four or five gas analysis and even more capabilities are planned and are now in development. The Omitec PDA2100A won the 1995 Top 20 Tools Award from Motor Magazine. Additional hardware options and software modules are available for the PDA2100A.

PRODUCT KIT CONTENTS: PDA2100A, PDA main unit, ignition module, scope module, PDA2100A software on PCMCIA card, (4) color coded lab scope leads, black ground lead, oxygen sensor probe, PDA2100A sync lead, PDA2100A secondary lead, EI (DIS) lead set, GM HEI secondary lead, amp probe, 4-pc backprobe kit, serial to parallel printer adapter, 12V isolated car battery adapter, A/C wall adapter/charger, PDA2100A user's manual, protective padded pouch, PDA2100A video and plastic blow molded storage case.

PDA2100A Diagnostic Tool Specifications General System Features General Function Features LAB SCOPE MULTIMETER AUTO METER IGNITION SCOPE Engine Tests Quick Ignition Cursor Functions Power Features Printing Physical Dimensions (with module) Environmental Operating Specifications System Specifications Display Information And Screen Refresh Rate Screen refresh rate Test Specifications LAB SCOPE MULTIMETER IGNITION SCOPE Additional Features Available ScreenShots   General System Features Complete hand held automotive diagnostic system PC compatible system Portable system, can be used on the road Simple, clearly marked, user friendly keypad; directional keys, enter/exit keys and 4 function keys Modular design enables user to add modules for added functionality and versatility Built-in, screen context sensitive HELP function Includes a WAVEFORM LIBRARY with 20 known good waveforms General Function Features LAB SCOPE Four channel Digital Storage Oscilloscope (DSO) Displays up to 4 different waveforms at a time AUTO scope setup Store and replay up to 8 waveform files ( up to 50 screens in each file) User configurable probe menu for use with almost any type probe MULTIMETER Four channel digital multimeter Displays digital values up to 4 signals at a time Digital displays up to 6 panels at a time User configurable probe menu for use with almost any type probe AUTO METER Preconfigured meter, giving the user all necessary data for INJECTOR O2 sensor MAP/MAF ANALOG MAP/MAF DIGITAL TPS IGNITION SCOPE 5 MHz analog peak detect circuit to capture all max. spark signals Shows primary or at secondary waveform patterns for up to 8 cylinders a time Full DIS/Conventional ignition system waveform display capabilities (raster , parade and single cylinder) Extensive vehicle database Shows primary and secondary ignition waveforms on the same screen ("BOTH" mode) Shows DIS power and waste ignition waveforms for up to 8 cylinders at a time Shows DIS both power and waste on the same screen ("BOTH" mode) HISTOGRAPHS (View primary or secondary up to 8 cylinders at a time) SINGLE CYLINDER TEST Digital KV meter (polarity, min., max. and live KV) BARGRAPHS Spark KV/V bargraph (secondary or primary) Spark KV bargraph (DIS power or waste) Burn KV bargraph Burn time bargraph Dwell bargraph ENGINE TESTS DIODE TEST (Alternator test) CYLINDER EFFICIENCY TEST (Cylinder Contribution test for computer controlled engines) CRANKING TEST (Relative compression test for both conventional and DIS systems) POWER CHECK (Power balance test for non computer controlled engines) QUICK IGNITION Shows primary or secondary ignition waveform patterns Displays every ignition cycle on screen Store and retrieve up to 8 ignition waveform files (up to 50 screens for each file) Digital ignition meter showing: polarity, min., max. and live KV Cursor Functions - Full cursor functions in Lab Scope , Ignition Scope and Quick Ignition - Displays two measurement points and the difference between them - Choice of 3 different cursor measurements Volt difference Time difference Frequency (Hz) Power Features Operates from 3 different power sources: Vehicle battery, using the vehicle battery adapter Six AA rechargeable internal battery pack (up to 4 HRS. on a full charge) A/C charger/converter Power Management Power saver feature Low battery indicator Rechargeable while in use Rechargeable with A/C adapter or vehicle battery adapter Fast charge in 1 hour Printing Print any display screen except F1-HELP Serial port links to any EPSON or HP graphics compatible printer Physical Dimensions (with module) Length: 10"/25.4cm Width: 4.75"/12.1cm (max) Depth: 1.6"/4.1cm(max) Weight: 1.8 lbs./0.85 kg Environmental Operating Specifications Operating temp. 0 C to 45 C (humidity 20% to 85%) Storage temp: -5 C to 50 C (humidity 20% to 85%) Dust water and grease resistant Rubber bumpers and shock resistant System Specifications Removable memory card (PCMCIA type II) Total of 1220 screens (including replay files and reports) Total of 24 save and replay files (up to 50 screens for each file) Total of 20 report screens available to save and print Time and date setup Power management Power on time Backlight on time Sampling on time Display Information And Screen Refresh Rate High resolution LCD super twist display: 256 X 320 pixels Cold cathode fluorescent backlighting on/off control Usable in total darkness Contrast control keys Screen refresh rate Lab scope : @ 0.5 ms/div. = 10/sec.; @ 10 sec./div. = 1/min. Multimeters : Bar Graphs = 4/sec., digital = 1/sec. Autometers : - Injector (scope) = 3/sec. 02 = continuous MAP/MAF analog = continuous MAP/MAF digital = 3/sec. TPS = continuous Ignition Scope : - Below 1700 RPM = every third ignition cycle (example: 700 RPM = 2.5/sec.) Quick Ignition : - Below 1700 RPM = every ignition cycle (no RPM displayed) Above 1700 RPM = every other ignition cycle (no RPM displayed) Example: 700 RPM 5/sec. (with no RPM displayed) Test Specifications LAB SCOPE Sampling rate: 2.2 MHz Band width: 5MHz Sweep rate: 25 us/div. to 10 sec./div. Voltage range: 125 mV/div. to 50 V/div. Accuracy: 0.5% Time base: 25 us/div. to 10 sec./div Trigger with autoset capability MULTIMETER Sampling rate: 500 KHz Band width: 5MHz Sweep rate: 0.5 ms/div. to 10 sec./div. Min. 0.5% accuracy Max. 0.5% accuracy Avg. 0.5% accuracy RMS 0.5% accuracy Frequency (4Hz to 50 KHz) IGNITION RPM range: 100 to 12000 RPM Primary voltage: 0 to 750 V Secondary display ranges -9 KV to 45 KV -5 KV to 25 KV -2 KV to 6 KV Time base: 1.0 ms/div. to 10 ms/div. Burn time 0 to 10 ms (0.1 ms resolution) Dwell range; Degrees , 0 to 360 , 1 resolution (divided by number of cylinders) Percent: 0 to 100%, 1% resolution Additional Features Available ECM Database Portable 4-gas Portable 5-gas OBD II Scanner Spanish and 5 language software also available

Screen Shots

IGNITION (raster)	AUTOMETERS (Injector)	MULTIMETERS (6 Panels)
ENGINE TEST (Cranking test)	LAB SCOPE (4 Channel)	QUICK IGNITION
SCOPE CHANNEL	MULTIMETERS (Using current probe)	ENGINE TEST (Cylinder Efficiency)
ENGINE TEST (Diode Pattern)	VEHICLE SETUP (DIS Vehicle)

For More Information Contact: 2215 S Castle Way, Lynnwood, Wa 98036 Tel: 425-483-6103 FAX: 425-402-8334 Email: sales@allview.com TOP

HOME © 2005 Omitec, Inc.